This unit converter changes values between metric and imperial units of length, weight, temperature, volume, area and speed. Choose a category, enter a value, and pick the units to convert from and to. Alongside the main answer, it shows the same value in every unit in that category, so you can compare them at a glance.

How to use the unit converter

  1. Choose a category: Length, Weight, Temperature, Volume, Area or Speed.
  2. Enter the value you want to convert.
  3. Pick the unit in the From list and the unit you want in the To list. The lists change to match the category.
  4. Read the result in large type, then check the table underneath for the value in every other unit.

Temperatures below absolute zero are rejected, and other categories accept zero or more.

How it works

For length, weight, volume, area and speed, each unit has a fixed factor that links it to one base unit (metres, kilograms, litres, square metres and metres per second). The converter multiplies your value by the factor of the unit you are converting from, then divides by the factor of the unit you are converting to.

Many of these factors are exact by international definition. An inch is exactly 0.0254 m, a foot 0.3048 m, a mile 1,609.344 m and a pound 0.45359237 kg. A US gallon is exactly 3.785411784 litres and a UK gallon 4.54609 litres.

Temperature cannot use a single factor, because the scales start at different zero points. The converter uses these formulas:

  • °F = °C × 9/5 + 32
  • °C = (°F − 32) × 5/9
  • K = °C + 273.15

Worked example

  • Length: 5 miles × 1,609.344 = 8,046.72 m, which is 8.04672 km.
  • Weight: 10 lb × 0.45359237 = 4.5359237 kg.
  • Temperature: 68 °F − 32 = 36, and 36 × 5/9 = 20 °C. Adding 273.15 gives 293.15 K.

Quick reference: common conversions

From To Multiply by
Inches Centimetres 2.54 (exact)
Feet Metres 0.3048 (exact)
Miles Kilometres 1.609344 (exact)
Kilograms Pounds about 2.20462
Ounces Grams about 28.3495
US gallons Litres 3.785411784 (exact)
UK gallons Litres 4.54609 (exact)
Acres Hectares about 0.404686
Square feet Square metres 0.09290304 (exact)
Miles per hour Kilometres per hour 1.609344 (exact)
Knots Kilometres per hour 1.852 (exact)

Speed units follow the same idea as length. One knot is one nautical mile per hour, and one nautical mile is exactly 1,852 metres. Area factors are the length factor squared, so a square foot is 0.3048 × 0.3048 = 0.09290304 square metres. That is why area conversions grow much faster than length ones.

Watch out for gallons and fluid ounces: the US and UK versions are different sizes, and the converter lists them separately. A UK gallon is about 20% larger than a US gallon. If you are converting measurements for a health calculation, the BMI calculator accepts both metric and US units directly.

Frequently asked questions

How many centimetres are in an inch?

Exactly 2.54. The inch has been defined as 25.4 millimetres since 1959.

How do I convert Celsius to Fahrenheit in my head?

Double the Celsius figure and add 30 for a rough answer. For an exact one, multiply by 9/5 and add 32. So 20 °C is exactly 68 °F, while the shortcut gives 70.

Why are US and UK gallons different?

They come from different historical standards. The US kept an older wine gallon, while the UK adopted the larger imperial gallon in 1824. Fluid ounces differ too.

What is the difference between a tonne and a ton?

A tonne, or metric ton, is 1,000 kg. The US short ton is 2,000 lb and the UK long ton is 2,240 lb. This converter uses the metric tonne.

Why do some results show as powers of ten?

Very large or very small numbers, such as square inches in a square kilometre, are shown in scientific notation so they stay readable.